东莞金展瑞精密模具有限公司

National service hotline400-0769-391(Toll free) 138-2910-0895  Mr. Zhao

Contact Jin Zhanrui

Contact Jin Zhanrui Dongguan Kingrui Precision Mold Co.
 
24-hour hotline: 138-2693-8913
 
Phone: 0769-82663318
 
E-mail: kingruizhao@kingruimold.com
 
Address: Room 201, Building 1, No. 376 Zhen'an Middle Road, Chang'an Town, Dongguan City, Guangdong Province

What is mold aligning unit?

Article source: Published time:2016-03-30 14:37:02
Mold aligning unit
 
Mold aligning unit also referred to as co-members of the guide means mold edge. To really maintain the alignment of the upper and lower molds and shorten the preparation time, depending on the accuracy of products and production quantity requirements and other conditions, mold aligning unit mainly for the following five categories:
 
(1) non-lead type: direct its edge parts of the mold industry cooperation attached to the punch, do not use the boot device.
 
(2) lead type: this device is the most standard configuration, the guide means is mounted on the lower die and mold base, not through the template, commonly referred to as mold base type.
 
(3) the outer and the inner guide and guided by type (a): this device is most commonly used to construct a continuous mold, the punch between the fixed plate and pressure plate installed inside the guide device. Punch and mother die of involution with fixed pin and the outer guide device. Another function is to prevent the inner guide means of the pressure plate and the inclination to protect small punch.
 
(4) the outer and the inner guide and guided by type (2): The construction of such devices is to use high-speed high-precision continuous mold, guide means within the punch through the fixing plate, pressure plate and the base mold fixing plate, etc. Wait. Inner guide device itself has to fit the mold blade member and the protection of small punch effect. The main role of the external guide device is able to obtain smooth object mounted on the mold and decomposition punch.
 
(5) lead type: This structure does not use the outer guide means, the guide means through the punch fixing plate, pressure plate and the base mold fixing plate, etc., accurately maintaining the positional relationship between each of the plates to protection punch.
Precision machining, precision wire cutting, coordinate jig grinders